Description of upgrade
IFS Cycle 43r3 is an upgrade with many scientific contributions, including changes in data assimilation (both in the EDA and the 4DVAR), in the use of observations, and in modelling. The new cycle only includes meteorological changes; there are no technical changes, e.g. new resolutions.
The page will be updated as required. It was last changed on 14.07.2017.
Further information and advice regarding the upgrade can be obtained from User Support.
Timetable for implementation
The planned timetable for the implementation of the cycle 43r3 is as follows:
|03.04.2017||Initial publication on the web.|
|24.05.2017||Initial announcement, with test data in MARS|
|09.06.2017||Availability of test data in dissemination|
Expected date of implementation
The timetable represents current expectations and may change in light of actual progress made.
IFS cycle 43r3 has been implemented in operations on Tuesday 11 July 2017. We have removed the release candidate charts in ecCharts and on the web. We have also discontinued the dissemination of the release candidate data.
Meteorological content of the new cycle
- Improved humidity background error variances directly from the EDA like for all other variables.
- Revised wavelet filtering of background error variances and revised quality control of drop-sonde wind observations in 4DVAR to improve tropical cyclone structures.
- Increased use of microwave humidity sounding data by adding new sensors (SAPHIR, GMI 183 GHz channels).
- Activation of 118 GHz channels over land from MWHS-2 instrument on-board FY-3C.
- Harmonised data usage over land and sea-ice for microwave sounders (adding MHS channel 4 over snow, adding some ATMS channels, lower observation errors for MHS data over land).
- Improved screening of infrared observations for anomalously high atmospheric concentrations of hydrogen cyanide (HCN) from wildfires.
- Improved quality control for radio occultation observations and radiosonde data.
- New, more efficient radiation scheme with reduced noise and more accurate longwave radiation transfer calculation.
- New aerosol climatology based on ‘tuned’ CAMS aerosol re-analysis including dependence on relative humidity.
- Increased super-cooled liquid water at colder temperatures (down to -38C) from the convection scheme.
- Visibility calculation changed to use ‘tuned’ CAMS aerosol climatology.
Meteorological impact of the new cycle
for HRES and ENS can be found in the .
Results for the HRES from alpha- and beta-testing are positive, with many of the scores over NH, SH and Europe indicating statistically significant improvements at the 95% level up to about forecast day 5 when forecasts are verified against own analysis. When forecasts are verified against observations, the positive impact of 43r3 is also evident. Improvements are larger in summer than in winter and are to a large extent due to improvements in the humidity background error, as well as changes to the deep convection scheme and the aerosol climatology, which improved the temperature gradient between extra-tropics and tropics. Improvements are significant for temperature and vector wind throughout the extra-tropical troposphere. In the tropics there is some deterioration in temperature and humidity at certain vertical levels associated with the changes to the deep convection scheme. Surface parameters show partially statistically significant improvements both in the tropics and extra-tropics (2-m humidity, 10-m wind speed, total cloud cover, precipitation), except for 2-m temperature which shows neutral results.
Over the ocean, statistically significant improvements are seen for verification against own analysis for 10-m wind speed, significant wave height, and mean wave period.
Results for the ENS based on alpha-testing are mainly positive and similar to the HRES both for upper-air and surface variables for the NH, SH, and Europe when verified against analysis. In the tropics there is some deterioration in upper tropospheric wind speed and lower tropospheric temperature associated with reduced spread. There are also some slight deteriorations in tropical 2-m temperature and precipitation scores.
Changes in the tropical cyclone analysis are notable, with the cyclone structure defined in a better way. At forecast day 1 there is a marginally significant improvement in position error; the improvement is undetectable thereafter. Tropical cyclone intensity (as measured by central pressure) is slightly reduced from day 2 onwards: for lead times beyond four days this has a beneficial effect since it reduces the existing negative bias in tropical cyclone central pressure in such forecasts. You can find statistics on the Cycle 43r3 tropical cyclones forecast performance in TCPerformance_43r3_43r1.pdf.
Technical details of the new cycle
Changes to GRIB encoding
The GRIB model identifiers (generating process identification number) for cycle 43R3 will be changed as follows:
|GRIB 1 |
|grib_api key||Component||Model ID|
|Ocean wave model||112||113|
|HRES stand-alone ocean wave model||212||213|
New model output parameters
There are no new parameters introduced with cycle 43r3.
Impact on users
The versions of EMOSLIB and GRIB API used to decode the existing operational cycle 43r1 data are suitable to handle the cycle 43r3 data as well.
The re-forecasts for the cycle 43r3 are computed from 8 June 2017. Therefore, the model climate used for the Extreme Forecast Index and other products is using a mixture of cycle 43r1 and cycle 43r3 re-forecast data. We will have a model climate fully based on cycle 43r3 date by 22 June 2017, in time before the implementation date of the new cycle. Users planning to build a model climate using the cycle 43r3 test re-forecasts will also need to include cycle 43r1 re-forecast data during the following weeks.
Availability of test data from the cycle 43r3 test suites
Test data in MARS
IFS data from the cycle 43r3 suites is available in MARS with experiment version 0071 (MARS keyword EXPVER=0071) starting from 26 March 2017 at 06UTC.
The data can be accessed in MARS from:
- HRES (class=od, stream=oper, expver=71)
- Wave HRES (class=od, stream=wave, expver=71)
- ENS (class=od, stream=enfo, expver=71)
- 00 UTC cycle only before 07 June 2017
- ENS Wave (class=od, stream=waef, expver=71)
- 00 UTC cycle only before 07 June 2017
Only registered users of ECMWF archiving systems will be able to access the test data sets in MARS.
The data should not be used for operational forecasting. Please report any problems you find with this data to User Support.
Test data in dissemination
IFS Cycle 43r3 test data from the release candidate testing stage is available through the test dissemination system. Users of ECMWF dissemination products can trigger transmission of test products by logging in to the test ECPDS system at https://ecpds-xmonitor.ecmwf.int/ in the usual manner. In order to receive the test products, users have to have their firewall open to the relevant ECPDS Data Movers:
- Internet transfers: 220.127.116.11 ((()) 18.104.22.168
- RMDCN transfers: 22.214.171.124 ()
The IFS Cycle 43r3 test products are available as version number 71 (file names ending with '71'). The test products are generated daily, shortly behind real-time from both the 00UTC and 12UTC runs and based on the operational dissemination requirements and the IFS Cycle 43r3 test data for HRES, ENS, HRES-WAM, ENS-WAM and HRES-SAW.
Graphical display of IFS cycle 43r3 test data using ecCharts
Forecast users can use ecCharts to inspect the IFS Cycle 43r3 test data and compare with the operational forecast. This facility is provided for testing purposes: the 43r3 test charts should not be relied upon for operational forecasting. Note in particular that the availability and timeliness of the cycle 43r3 test data will vary, and can be delayed with respect to the operational schedule.
IFS Cycle 43r3 test data is accessible via the ecCharts layers menu, identified by the label "(Esuite: 0071)".
Web charts based on IFS cycle 43r3 test data
Web charts based on IFS cycle 43r3 test data are available. They can be viewed by first selecting the chart in the Charts Catalogue, and then choosing the Model run tab above the chart, then selecting "New cycle (IFS 43r3)". The chart types which have 43r3 data available are those for which the icon representing the chart includes a grey arrow, as illustrated hereafter:
All these charts are clickable. Note that if you click on a Cycle 43r3 chart then the location products you see, such as meteograms, will be generated from that suite. If you change back on the Model run tab to operational, then click "OK" on the location product window, the product will be re-created using operational model data.
ENS meteograms based on IFS cycle 43r3 test data
ENS Meteograms based on IFS cycle 43r3 test data are available. They can be plotted by choosing 'New cycle (IFS 43r3)' under the tab named 'Model run' on the interactive ENS meteogram page
Option 1 - simple time-critical jobs
Member State users of the "Simple time-critical jobs" framework can test that their scripts will work with the IFS Cycle 43r3 test data by using the special 'events' set up for this purpose:
|Event ID||Event name||Description|
|1633||e_ms090||At this stage, the e-suite step 090 (HRES-BC) has been generated.|
|1634||e_ms144||At this stage, the e-suite step 144 (ENS-BC) has been generated.|
|1635||e_ms240||At this stage, the e-suite step 240 (HRES) has been generated.|
|1636||e_ms360||At this stage, the e-suite step 360 (ENS) has been generated.|
|1637||e_mslaw||At this stage, the e-suite step law (HRES-SAW) has been generated.|
|1638||e_ms1104||At this stage, the e-suite step 1104 (ENS-MOFC) has been generated.|
|1639||msrefc||At this stage, the e-suite step refc (REFORECAST) has been updated.|
For these events, MSJ_EXPVER environment variable is set to 0071 and can be used to specify the IFS Cycle 43r3 test data any MARS retrievals.
These events are intended for testing technical aspects only and should not be used for operational forecasting.
Options 2 and 3
Option 2 or 3 time-critical applications can be tested with theor received in Dissemination.
- Flemming, J., Benedetti, A., Inness, A., Engelen, R. J., Jones, L., Huijnen, V., Remy, S., Parrington, M., Suttie, M., Bozzo, A., Peuch, V.-H., Akritidis, D., and Katragkou, E.: The CAMS interim Reanalysis of Carbon Monoxide, Ozone and Aerosol for 2003–2015, Atmos. Chem. Phys., 17, 1945-1983, doi:10.5194/acp-17-1945-2017, 2017.
- Hogan, R., and Bozzo, A., 2016: ECRAD: A new radiation scheme for the IFS. ECMWF Research Department Technical Memorandum No. 787, pp 33. Available at http://www.ecmwf.int/sites/default/files/elibrary/2016/16901-ecrad-new-radiation-scheme-ifs.pdf.
|Date||Reason for update|